You are here: Trang chủ Products Electrical Equipment Disconnector Swich ARS pro VERTICAL FUSE SWITCH DISCONNECTORS

ARS pro VERTICAL FUSE SWITCH DISCONNECTORS

Written by 
Published in Disconnector Swich
Read 3107

Apator

 

ASR pro Description   Thông số kỹ thuật Material   Feature
 ARS pro vertical fuse switch disconnectors
ARS pro vertical fuse switch disconnectors are designed for distribution of electricity and protection against short cir­cuits and overloads in three phase alternative current circuits. ARS pro fuse switch disconnectors are dedicated for applications which require reliability and safety like low voltage distribution boards installed in transformer substations, industrial low voltage distribution boards and cable cabinets.   ARS 00/100mm pro In=160 A, Un=690 V
ARS 00 pro In=160 A, Un=690 V
ARS 2 pro In=400 A, Un=690 V
ARS 3 pro In=630 A, Un=690 V
ARS 630 kVA pro In=910 A, Un=400 V
RWS 1250 A pro In=1250 A, Un=400 V
ARS 1250 A pro In=1250 A, Un=400 V
Lateral bus bar terminal
Electronic fuse monitoring module		 ARS fuse switch disconnectors are made of fibre glass strengthened, thermoplastic polyamides with halogen free flame retardant added. Added flame retardant provides V2 flammability class according to IEC 60695-11-10. Such thermoplastics have longer self-extinguish time after ignition source is removed than V0 class thermoplastics. Also dripping of non fla­ming parts of plastic is allowed.  
  • parallelly moving, double contact system,
  • two arc chutes installed in each pole 2 are equipped with metal plates that stretch and further split electric arc during switching off of the circuit,
  • main base of fuse switch disconnector ARS pro is made of halogen free, fibre glass strengthened, self extingu­ishing, thermoset polyester of V0 flammability class,
  • other plastic parts of fuse switch disconnectors ARS pro are made of fibre glass strengthened, thermoplastic polyamides with halogen free flame retardant added; thanks to such addition the highest flammability class – V0 was achieved,
  • silver plated contacts provide low power loss and high conductivity,
  • for installation on to 185 mm busbar system,
  • triple pole switching (three poles at the same time) or single pole switching 

VERSIONS 

ARS 00/100mm pro In=160 A, Un=690 V ARS 2 pro In=400 A, Un=690 V ARS 1250 A pro In=1250 A, Un=400 V
  • Triple pole switching (three poles at the same time); 
  • Fuse switch disconnectors width: 50 mm; 
  • Possible cable connection: S-bridge clamp, screw and V-clamp to connect conductor with cross-section of up to 120 mm2 to each terminal.
  • Triple pole switching (three poles at the same time) or single pole switching (separately each pole); 
  • Fuse switch disconnectors width: 100 mm; 
  • Possible cable connection: M10 screw, V-clamp and 2V-clamp.
  • Triple pole switching (three poles at the same time) or single pole switching (separately each pole);
  • Fuse switch disconnectors width: 200 mm; 
  • Possible cable connection: two M12 screw for each pole.

 

 

     Catalogue...

back to top

HOP THIEN COMPANY LIMITED

Address   : Ground Floor, Rosana Tower, No. 60 Nguyen Dinh Chieu St., Da Kao Ward, Dist. 1, Ho Chi Minh City, Vietnam
Tel

: +84 28 22 00 21 24 ; 09 88 57 43 47 (Mr. Trieu)

                                        09 79 87 84 50 (Mr. Khiet)            
Fax : +84 28 22 20 22 01
Email : thientrieu@hopthien.com
Website : http://www.hopthien.com


ngoxuantrieu

ngoxuantrieu

Joomla Templates - by Joomlage.com